Skip to main content

Migration Guide

Migrating to Cypress 13.0​

This guide details the changes and how to change your code to migrate to Cypress version 13. See the full changelog for version v13.0.

Cypress Cloud Test Replay​

Test Replay is enabled by default in v13 of the Cypress App.

You may need to allowlist capture.cypress.io if you work with a strict VPN. See our FAQ section about VPN subdomain allowlisting.

With Test Replay enabled, the Cypress Runner UI is hidden by default when recording a run to the Cloud. If the Runner UI is needed during the run, you can enable it by passing --runner-ui to the cypress run command.

You can opt-out of this feature in Cloud project-level settings.

Video updates​

video is set to false by default​

You can continue recording video by setting video to true either in your Cypress configuration or via overriding options. This can be useful if you want video locally or want video for some other reason, like in non-Chromium browsers where Test Replay is not available.

const { defineConfig } = require('cypress')

module.exports = defineConfig({
video: true,
})

videoUploadOnPasses configuration option has been removed​

Most users used videoUploadOnPasses as a way to skip the time to compress and upload videos to the Cloud. Since we're turning off videoCompression by default, this configuration option does not offer the time saving value that it once would.

If you want to prevent a passing test from uploading to the Cloud, we recommend deleting the video using our guide with code examples to discard captured video of passing tests.

videoCompression is set to false by default​

Cypress has the capability to compress recorded videos after a run to reduce the video file size. By default, compression is now turned off. This results in a reduced run time by removing the time to compress the video, a larger video file size and better video quality.

You can enable this with the videoCompression configuration option if you'd like to reduce the video file size for any reason. This will also reduce the video quality and take slightly longer to process and complete the run.

const { defineConfig } = require('cypress')

module.exports = defineConfig({
// value can be true/false -or- an integer between 0 and 51
videoCompression: true,
})

cy.readFile() is now a query command​

In Cypress v13, the .readFile() command is now a query. Tests written using it should continue to operate exactly as before; no changes are necessary.

readFile() will re-read the file from disk if any upcoming command in the same chain fails. Assertions no longer have to be directly attached.

cy.readFile(`users.json`).its('users.123.fullName').should('eq', 'John Doe')

Beginning with Cypress v13, the above test will re-read the file until the file exists, it has the requested property, and it passes the assertion.

In previous versions of Cypress, the above command would retry until the file existed, but would not re-read it from disk if the file didn't have the requested property or the contents didn't match.

.readFile() can no longer be overwritten with Cypress.Commands.overwrite()​

Queries must be overwritten using Cypress.Commands.overwriteQuery(). If you were previously overwriting cy.readFile(), you will need to update your code to use Cypress.Commands.overwriteQuery('readFile', function() { ... }) rather than Cypress.Commands.overwrite('readFile', () => { ... }). For more details on overwriting queries, see the Overwriting Existing Queries.

Migrating to Cypress 12.0​

This guide details the changes and how to change your code to migrate to Cypress version 12.0. See the full changelog for version 12.0.

The Session and Origin experiment has been released as General Availability (GA), meaning that we have deemed this experiment to be feature complete and free of issues in the majority of use cases. With releasing this as GA, the experimentalSessionAndOrigin flag has been removed, the cy.origin() and cy.session() commands are generally available and Test Isolation is enabled by default.

Node.js 14+ support​

Cypress comes bundled with its own Node.js version. However, installing the cypress npm package uses the Node.js version installed on your system.

Node.js 12 reached its end of life on April 30, 2022. See Node's release schedule. This Node.js version will no longer be supported when installing Cypress. The minimum Node.js version supported to install Cypress is Node.js 14+.

Test Isolation​

The testIsolation config option is enabled by default. This means Cypress resets the browser context before each test by:

Test suites that relied on the application to persist between tests may have to be updated to revisit their application and rebuild the browser state for each test that needs it.

Before this change, it was possible to write tests such that you could rely on the application (i.e. DOM state) to persist between tests. For example you could log in to a CMS in the first test, change some content in the second test, verify the new version is displayed on a different URL in the third, and log out in the fourth.

Here's a simplified example of such a test strategy.

Before Multiple small tests against different origins

it('logs in', () => {
cy.visit('https://example.cypress.io')
cy.get('input#password').type('Password123!')
cy.get('button#submit').click()
})

it('updates the content', () => {
// already on page redirect from clicking button#submit
cy.get('#current-user').contains('logged in')
cy.get('button#edit-1').click()
cy.get('input#title').type('Updated title')
cy.get('button#submit').click()
cy.get('.toast').contains('Changes saved!')
})

it('validates the change', () => {
cy.visit('/items/1')
cy.get('h1').contains('Updated title')
})

After migrating, when testIsolation=true by default, this flow would need to be contained within a single test. While the above practice has always been discouraged we know some users have historically written tests this way, often to get around the same-origin restrictions. But with cy.origin() you no longer need these kind of brittle hacks, as your multi-origin logic can all reside in a single test, like the following.

After One big test using cy.origin()

it('securely edits content', () => {
cy.origin('cypress.io', () => {
cy.visit('https://example.cypress.io')
cy.get('input#password').type('Password123!')
cy.get('button#submit').click()
})

cy.origin('cypress-dx.com', () => {
cy.url().should('contain', 'cms')
cy.get('#current-user').contains('logged in')
cy.get('button#edit-1').click()
cy.get('input#title').type('Updated title')
cy.get('button#submit').click()
cy.get('.toast').contains('Changes saved!')
})

cy.visit('/items/1')
cy.get('h1').contains('Updated title')
})

The just-released cy.session() command can be used to setup and cache cookies, local storage and session storage between tests to easily re-establish the previous (or common) browser contexts needed in a suite. This command will run setup on its initial execution and will restore the saved browser state on each sequential command execution. This command reduces the need for repeated application logins, while users also benefit from the test isolation guardrails to write independent, reliable and deterministic tests from the start.

If for whatever reason you still need to persist the dom and browser context between tests, you can disable test isolation by setting testIsolation=false on the root configuration or at the suite-level. For example:

describe('workflow', { testIsolation: false }, () => {
...
})

It is important to note that while disabling test isolation may improve the overall performance of end-to-end tests, it can cause state to "leak" between tests. This can make later tests dependent on the results of earlier tests, and potentially cause misleading test failures. It is important to be extremely mindful of how tests are written when using this mode, and ensure that tests continue to run independently of one another.

For example the following tests are not independent nor deterministic:

describe('workflow', { testIsolation: false }, () => {
it('logs in', () => {
cy.visit('https://example.cypress.io/log-in')
cy.get('username').type('User1')
cy.get('password').type(Cypress.env('User1_password'))
cy.get('button#login').click()
cy.contains('User1')
})

it('clicks user profile', () => {
cy.get('User1').find('#profile_avatar').click()
cy.contains('Email Preferences')
})

it('updates profile', () => {
cy.get('button#edit')
cy.get('email').type('[email protected]')
cy.get('button#save').click()
})
})

In the above example, each test is relying on the previous test to be successful to correctly execute. If at any point, the first or second test fails, the sequential test(s) will automatically fail and provide unreliable debugging errors since the errors are representative of the previous test.

The best way to ensure your tests are independent is to add a .only() to your test and verify it can run successfully without the test before it.

Simulating Pre-Test Isolation Behavior​

Test isolation did not truly exist pre-12. Pre-Cypress 12, the behavior was a hybrid of both testIsolation enabled and disabled. All local storage and cookies on the current domain were cleared, but Cypress did not clear session storage and the page always persisted.

In Cypress 12+ when testIsolation is enabled, local storage, session storage and cookies in all domains are cleared and the page is cleared. When testIsolation is disabled, nothing is cleared before the next test so all local storage, session storage and cookies & the page persists.

If you wanted to match pre-Cypress 12 behavior, you need to disable testIsolation, then run cy.clearLocalStorage() and cy.clearCookies() in a beforeEach hook to clear the local storage and cookies in the current domain.

describe('match pre-12 behavior', { testIsolation: false }, () => {
beforeEach(() => {
cy.clearLocalStorage()
cy.clearCookies()
// other beforeEach logic to restore the expected local storage or cookies needed on the client.
})
})

Many of the issues test isolation solved were around cookie management with tests trying to save and persist cookies because the page was still available, but the cookies on the domain were unexpectedly cleared which broke interactions with the application. It wasn’t obvious Cypress was doing a partial browser clean up. Explicitly setting test isolation to enabled or disabled allows you to choose what is right for your tests.

Behavior Changes in Alias Resolution​

Cypress always re-queries aliases when they are referenced. This can result in certain tests that used to pass could start to fail. For example,

cy.findByTestId('popover')
.findByRole('button', { expanded: true })
.as('button')
.click()

cy.get('@button').should('have.attr', 'aria-expanded', 'false')

previously passed, because the initial button was collapsed when first queried, and then later expanded. However, in Cypress 12, this test fails because the alias is always re-queried from the DOM, effectively resulting in the following execution:

cy.findByTestId('popover').findByRole('button', { expanded: true }).click()

cy.findByTestId('popover')
.findByRole('button', { expanded: true }) // A button which matches here (is expanded)...
.should('have.attr', 'aria-expanded', 'false') // ...will never pass this assertion.

You can rewrite tests like this to be more specific; in our case, we changed the alias to be the first button rather than the unexpanded button.

cy.findByTestId('popover').findAllByRole('button').first().as('button')

If you want to alias a static value, such that it is never re-queried, you will need Cypress 12.3.0 or later, which introduced the type option for .as() to opt into the old behavior.

cy.get('.username').invoke('val').as('username', { type: 'static' })

See .as() for more details.

Command / Cypress API Changes​

Cypress.Cookies.defaults and Cypress.Cookies.preserveOnce​

The Cypress.Cookies.defaults and Cypress.Cookies.preserveOnce APIs been removed. Use the cy.session() command to preserve cookies (and local and session storage) between tests.

If you were using Cypress.Cookies.preserveOnce to preserve a specific cookie within a single spec, this might look like the following:

describe('Dashboard', () => {
beforeEach(() => {
- cy.login()
- Cypress.Cookies.preserveOnce('session_id', 'remember_token')
+ cy.session('unique_identifier', cy.login, {
+ validate () {
+ cy.getCookies().should('have.length', 2)
+ },
+ })
})

If you were using Cypress.Cookies.defaults to preserve a cookie or set of cookies across test, this might look like the following:

describe('Dashboard', () => {
beforeEach(() => {
- cy.login()
- Cypress.Cookies.defaults({
- preserve: ['session_id', 'remember_token']
- })
+ cy.session('unique_identifier', cy.login, {
+ validate () {
+ cy.getCookies().should('have.length', 2)
+ },
+ cacheAcrossSpecs: true
+ })
})

cy.server(), cy.route() and Cypress.Server.defaults​

The cy.server() and cy.route() commands and the Cypress.server.defaults API has been removed. Use the cy.intercept() command instead.

  it('can encode + decode headers', () => {
- Cypress.Server.defaults({
- delay: 500,
- method: 'GET',
- })
- cy.server()
- cy.route(/api/, () => {
- return {
- 'test': 'We’ll',
- }
- }).as('getApi')
+ cy.intercept('GET', /api/, (req) => {
+ req.on('response', (res) => {
+ res.setDelay(500)
+ })
+ req.body.'test': 'We’ll'
+ }).as('getApi')
cy.visit('/index.html')
cy.window().then((win) => {
const xhr = new win.XMLHttpRequest
xhr.open('GET', '/api/v1/foo/bar?a=42')
xhr.send()
})

cy.wait('@getApi')
- .its('url').should('include', 'api/v1')
+ .its('request.url').should('include', 'api/v1')
})

.invoke()​

The .invoke() command now throws an error if the function returns a promise. If you wish to call a method that returns a promise and wait for it to resolve, use .then() instead of .invoke().

cy.wrap(myAPI)
- .invoke('makeARequest', 'http://example.com')
+ .then(api => api.makeARequest('http://example.com'))
.then(res => { ...handle response... })

If .invoke() is followed by additional commands or assertions, it will call the named function multiple times. This has the benefit that the chained assertions can more reliably use the function's return value.

If this behavior is undesirable because you expect the function to be invoked only once, break the command chain and move the chained commands and/or assertions to their own chain. For example, rewrite

- cy.get('input').invoke('val', 'text').type('newText')
+ cy.get('input').invoke('val', 'text')
+ cy.get('input').type('newText')

.should()​

The .should() assertion now throws an error if Cypress commands are invoked from inside a .should() callback. This previously resulted in unusual and undefined behavior. If you wish to execute a series of commands on the yielded value, use.then() instead.

cy.get('button')
- .should(($button) => {

})
+ .then(api => api.makeARequest('http://example.com'))
.then(res => { ...handle response... })

.within()​

The .within() command now throws an error if it is passed multiple elements as the subject. This previously resulted in inconsistent behavior, where some commands would use all passed in elements, some would use only the first and ignore the rest, and .screenshot() would throw an error if used inside a .within() block with multiple elements.

If you were relying on the old behavior, you have several options depending on the desired result.

The simplest option is to reduce the subject to a single element.

cy.get('tr')
+ .first() // Limit the subject to a single element before calling .within()
.within(() => {
cy.contains('Edit').click()
})

If you have multiple subjects and wish to run commands over the collection as a whole, you can alias the subject rather than use .within().

cy.get('tr')
- .within(() => {
- cy.get('td').should('have.class', 'foo')
- cy.get('td').should('have.class', 'bar')
- })
+ .as('rows') // Store multiple elements as an alias

+cy.get('@rows').find('td').should('have.class', 'foo')
+cy.get('@rows').find('td').should('have.class', 'bar')

Or if you have a collection and want to run commands over every element, use .each() in conjunction with .within().

cy.get('tr')
- .within(() => {
- cy.contains('Edit').should('have.attr', 'disabled')
- })
+ .each($tr => {
+ cy.wrap($tr).within(() => {
+ cy.contains('Edit').should('have.attr', 'disabled')
+ })
+ })

Cypress.Commands.overwrite()​

In Cypress 12.0.0, we introduced a new command type, called queries. A query is a small and fast command for getting data from the window or DOM. This distinction is important because Cypress can retry chains of queries, keeping the yielded subject up-to-date as a page rerenders.

With the introduction of query commands, the following commands have been re-categorized and can no longer be overwritten with Cypress.Commands.overwrite():

If you were previously overwriting one of the above commands, try adding your version as a new command using Cypress.Commands.add() under a different name.

Migrating to Cypress 11.0​

This guide details the changes and how to change your code to migrate to Cypress version 11.0. See the full changelog for version 11.0.

Component Testing Updates​

As of Cypress 11, Component Testing is now generally available. There are some minor breaking changes. Most projects should be able to migrate without any code modifications.

Changes to Mounting Options​

Each major library we support has a mount function with two arguments:

  1. The component
  2. Mounting Options

Mounting options previously had several properties that are now removed:

  • cssFile, cssFiles
  • style, styles
  • stylesheet, stylesheets

Read more about the rationale here. We recommend writing test-specific styles in a separate css file you import in your test, or in your supportFile.

Before (Cypress 10)​

import { mount } from 'cypress/react'
import { Card } from './Card'

it('renders some content', () => {
cy.mount(<Card title="title" />, {
styles: `
.card { width: 100px; }
`,
stylesheets: [
'https://cdn.jsdelivr.net/npm/[email protected]/dist/css/bootstrap.min.css',
],
})
})

After (Cypress 11)​

/** style.css */
@import "https://cdn.jsdelivr.net/npm/[email protected]/dist/css/bootstrap.min.css";
.card { width: 100px }

/** Card.cy.jsx */
import { mount } from 'cypress/react'
import { Card } from './Card'
import './styles.css' // contains CDN link and custom styling.

it('renders some content', () => {
cy.mount(<Card title="title" />)
})

React - mountHook Removed​

mountHook from cypress/react has been removed. Read more about the rationale here.

We recommend simply replacing it with mount and a component.

Consider the following useCounter hook:

import { useState, useCallback } from 'react'

function useCounter() {
const [count, setCount] = useState(0)
const increment = useCallback(() => setCount((x) => x + 1), [])

return { count, increment }
}

Before - Cypress 10 and mountHook​

import { mountHook } from 'cypress/react'
import { useCounter } from './useCounter'

it('increments the count', () => {
mountHook(() => useCounter()).then((result) => {
expect(result.current.count).to.equal(0)
result.current.increment()
expect(result.current.count).to.equal(1)
result.current.increment()
expect(result.current.count).to.equal(2)
})
})

After - Cypress 11 and mount​

import { useCounter } from './useCounter'

it('increments the count', () => {
function Counter() {
const { count, increment } = useCounter()
return (
<>
<h1 name="count">Count is {{ count }}</h1>
<button onClick={increment}>Increment</button>
</>
)
}

cy.mount(<Counter />).then(() => {
cy.get('[name="count"]')
.should('contain', 0)
.get('button')
.click()
.get('[name="count"]')
.should('contain', 1)
})
})

React - unmount Removed​

unmount from cypress/react has been removed. Read more about the rationale here. We recommend using the API React provides for unmounting components, unmountComponentAtNode.

Before - Cypress 10 and unmount​

import { unmount } from 'cypress/react'

it('calls the prop', () => {
cy.mount(<Comp onUnmount={cy.stub().as('onUnmount')} />)
cy.contains('My component')

unmount()

// the component is gone from the DOM
cy.contains('My component').should('not.exist')
cy.get('@onUnmount').should('have.been.calledOnce')
})

After - Cypress 11 and unmountComponentAtNode​

import { getContainerEl } from 'cypress/react'
import ReactDom from 'react-dom'

it('calls the prop', () => {
cy.mount(<Comp onUnmount={cy.stub().as('onUnmount')} />)
cy.contains('My component')

cy.then(() => ReactDom.unmountComponentAtNode(getContainerEl()))

// the component is gone from the DOM
cy.contains('My component').should('not.exist')
cy.get('@onUnmount').should('have.been.calledOnce')
})

Vue - mountCallback Removed​

mountCallback from cypress/vue has been removed. Read more about the rationale here. We recommend using mount.

Before - Cypress 10 and mountCallback​

import { mountCallback } from 'cypress/vue'

beforeEach(mountCallback(MessageList))

it('shows no messages', () => {
getItems().should('not.exist')
})

After - Cypress 11 and mount​

beforeEach(() => cy.mount(MessageList))

it('shows no messages', () => {
getItems().should('not.exist')
})

Angular - Providers Mounting Options Change​

There is one breaking change for Angular users in regards to providers. In Cypress 10, we took any providers passed as part of the Mounting Options and overrode the component providers via the TestBed.overrideComponent API.

In Cypress 11, providers passed as part of the Mounting Options will be assigned at the module level using the TestBed.configureTestingModule API.

This means that module-level providers (resolved from imports or @Injectable({ providedIn: 'root' }) can be overridden, but providers specified in @Component({ providers: [...] }) will not be overridden when using cy.mount(MyComponent, { providers: [...] }).

To override component-level providers, use the TestBed.overrideComponent API.

See a concrete example here.

Vite Dev Server (cypress/vite-dev-server)​

When providing an inline viteConfig inside of cypress.config, any vite.config.js file is not automatically merged.

Before - Cypress 10 and viteConfig​

import { defineConfig } from 'cypress'

export default defineConfig({
component: {
devServer: {
framework: 'react',
bundler: 'vite',
viteConfig: {
// ... custom vite config ...
// result merged with `vite.config` file if present
},
},
},
})

After - Cypress 11 and viteConfig​

import { defineConfig } from 'cypress'
import viteConfig from './vite.config'

export default defineConfig({
component: {
devServer: {
framework: 'react',
bundler: 'vite',
viteConfig: {
...viteConfig,
// ... other overrides ...
},
},
},
})

Vite 3+ users could make use of the mergeConfig API.

Migrating to Cypress 10.0​

This guide details the changes and how to change your code to migrate to Cypress version 10.0. See the full changelog for version 10.0.

Cypress Changes​

  • The "Run all specs" and "Run filtered specs" functionality have been removed.
  • The experimental "Cypress Studio" has been removed and will be rethought/revisited in a later release.
  • Unsupported browser versions can no longer be run via cypress run or cypress open. Instead, an error will display.
  • In 9.x and earlier versions, cypress open would bring you directly to the project specs list. In 10.0.0, you must pass --browser and --e2e or --component as well to launch Cypress directly to the specs list.

Configuration File Changes​

Cypress now supports JavaScript and TypeScript configuration files. By default, Cypress will automatically load a cypress.config.js or cypress.config.ts file in the project root if one exists. The Configuration guide has been updated to reflect these changes, and explains them in greater detail.

Because of this, support for cypress.json has been removed since Cypress v10.

Related notes:

  • If no config file exists when you open Cypress, the automatic set up process will begin and either a JavaScript or TypeScript config file will be created depending on what your project uses.
  • You may use the --config-file command line flag or the configFile module API option to specify a .js or .ts file. JSON config files are no longer supported.
  • Cypress now requires a config file, so specifying --config-file false on the command line or a configFile value of false in the module API is no longer valid.
  • You can't have both cypress.config.js and cypress.config.ts files. This will result in an error when Cypress loads.
  • A defineConfig() helper function is now exported by Cypress, which provides automatic code completion for configuration in many popular code editors. For TypeScript users, the defineConfig function will ensure the configuration object passed into it satisfies the type definition of the configuration file.
  • Many pages and examples throughout the documentation have been updated to show configuration using cypress.config.js and cypress.config.ts vs the older cypress.json. For example:
const { defineConfig } = require('cypress')

module.exports = defineConfig({
e2e: {
baseUrl: 'http://localhost:1234',
},
})

Plugins File Removed​

Because Cypress now supports JavaScript and TypeScript configuration files, a separate "plugins file" (which used to default to cypress/plugins/index.js) is no longer needed.

Support for the plugins file has been removed, and it has been replaced with the new setupNodeEvents() and devServer config options.

Related notes:

  • The cypress/plugins/index.js plugins file is no longer automatically loaded by Cypress.
  • The setupNodeEvents() config option is functionally equivalent to the function exported from the plugins file; it takes the same on and config arguments, and should return the same value. See the Config option changes section of this migration guide for more details.
  • The devServer config option is specific to component testing, and offers a much more streamlined and consistent way to configure a component testing dev server than using the plugins file. See the Config option changes section of this migration guide for more details.
  • Many pages and examples throughout the documentation have been updated to show configuration in setupNodeEvents as well as the legacy plugins file. For example:
const { defineConfig } = require('cypress')

module.exports = defineConfig({
// setupNodeEvents can be defined in either
// the e2e or component configuration
e2e: {
setupNodeEvents(on, config) {
// bind to the event we care about
on('<event>', (arg1, arg2) => {
// plugin stuff here
})
},
},
})

Config Option Changes​

baseUrl​

The baseUrl config option is no longer valid at the top level of the configuration, and may only be defined inside the e2e configuration object.

caution

Attempting to set the baseUrl config option at the top level of the configuration will result in an error when Cypress loads.

componentFolder​

The componentFolder config option is no longer used, as it has been replaced by the specPattern testing-type specific option.

caution

Attempting to set the componentFolder config option will result in an error when Cypress loads.

devServer​

All functionality related to starting a component testing dev server previously in the pluginsFile has moved here. These options are not valid at the top-level, and may only be defined in the component configuration object.

Related notes:

  • Do not configure your dev server inside setupNodeEvents(), use the devServer config option instead.
info

See the dev server documentation for the UI framework you're using for more specific instructions on what the devServer should be for that framework. Some examples can be found in our framework documentation.

Variant 1 (webpack & vite dev servers)

Before
cypress/plugins/index.js
const { startDevServer } = require('@cypress/webpack-dev-server')
const webpackConfig = require('../../webpack.config.js')

module.exports = (on, config) => {
if (config.testingType === 'component') {
on('dev-server:start', async (options) =>
startDevServer({ options, webpackConfig })
)
}
}
After
const { defineConfig } = require('cypress')
const webpackConfig = require('./webpack.config.js')

module.exports = defineConfig({
component: {
devServer: {
framework: 'react', // or vue
bundler: 'webpack',
webpackConfig,
},
},
})

Variant 2 (react plugin dev servers)

Before
const devServer = require('@cypress/react/plugins/react-scripts')

module.exports = (on, config) => {
if (config.testingType === 'component') {
injectDevServer(on, config, {})
}
}
After
const { defineConfig } = require('cypress')

module.exports = defineConfig({
component: {
devServer: {
framework: 'react', // or vue
bundler: 'webpack',
},
},
})

experimentalStudio​

This option is no longer used. The experimental "Cypress Studio" has been removed and will be rethought/revisited in a later release.

caution

Attempting to set the experimentalStudio config option will result in an error when Cypress loads.

ignoreTestFiles β†’ excludeSpecPattern​

The ignoreTestFiles option is no longer used, and has been replaced with the excludeSpecPattern testing-type specific option.

Default values

  • e2e.excludeSpecPattern default value is *.hot-update.js (same as pervious ignore value)
  • component.excludeSpecPattern default value is ['/snapshots/*', '/image_snapshots/*'] updated from *.hot-update.js
  • The **/node_modules/** pattern is automatically added to both e2e.specExcludePattern and component.specExcludePattern, and does not need to be specified (and can't be overridden).
Before
{
"ignoreTestFiles": "path/to/**/*.js"
}
After
{
component: {
excludeSpecPattern: "path/to/**/*.js"
},
e2e: {
excludeSpecPattern: "other/path/to/**/*.js"
}
}
caution

Attempting to set the ignoreTestFiles config option will result in an error when Cypress loads.

Also, attempting to set the excludeSpecPattern config option at the top level of the configuration will result in an error when Cypress loads.

integrationFolder​

This option is no longer used, as it has been replaced by the specPattern testing-type specific option.

caution

Attempting to set the integrationFolder config option will result in an error when Cypress loads.

pluginsFile​

This option is no longer used, and all plugin file functionality has moved into the setupNodeEvents() and devServer options. See the Plugins file removed section of this migration guide for more details.

caution

Attempting to set the pluginsFile config option will result in an error when Cypress loads.

setupNodeEvents()​

All functionality related to setting up events or modifying the config, previously done in the plugins file, has moved into the setupNodeEvents() config options. This option is not valid at the top level of the config, and may only be defined inside the component or e2e configuration objects.

More information can be found in the Node Events Overview and the Configuration API documentation.

Before cypress/plugins/index.js

module.exports = (on, config) => {
if (config.testingType === 'component') {
// component testing dev server setup code
// component testing node events setup code
} else {
// e2e testing node events setup code
}
}
After
const { defineConfig } = require('cypress')

module.exports = defineConfig({
component: {
devServer(cypressConfig) {
// component testing dev server setup code
},
setupNodeEvents(on, config) {
// component testing node events setup code
},
},
e2e: {
setupNodeEvents(on, config) {
// e2e testing node events setup code
},
},
})

Alternately, you can continue to use an external plugins file, but you will need to load that file explicitly, and also update it to move any component testing dev server code into the devServer config option.

const { defineConfig } = require('cypress')
const setupNodeEvents = require('./cypress/plugins/index.js')

module.exports = defineConfig({
component: {
devServer(cypressConfig) {
// component testing dev server setup code
},
setupNodeEvents,
},
e2e: {
setupNodeEvents,
},
})

slowTestThreshold​

The slowTestThreshold configuration option is no longer valid at the top level of the configuration, and is now a testing-type specific option.

Note that the default values are unchanged (10000 for e2e and 250 for component).

caution

Attempting to set the slowTestThreshold config option at the top level of the configuration will result in an error when Cypress loads.

supportFile​

The supportFile configuration option is no longer valid at the top level of the configuration, and is now a testing-type specific option. More information can be found in the support file docs.

Before
{
"supportFile": "cypress/support/index.js"
}
After
{
component: {
supportFile: 'cypress/support/component.js'
},
e2e: {
supportFile: 'cypress/support/e2e.js'
}
}
caution

Attempting to set the supportFile config option at the top level of the configuration will result in an error when Cypress loads.

Also, for a given testing type, multiple matching supportFile files will result in an error when Cypress loads.

testFiles β†’ specPattern​

The testFiles option is no longer used, and has been replaced with the specPattern option, which must be defined inside the component and e2e configuration objects.

Default values:

  • No longer matches with .coffee or .cjsx.
  • e2e.specPattern default value is cypress/e2e/**/*.cy.{js,jsx,ts,tsx}.
  • component.specPattern default value is **/*.cy.{js,jsx,ts,tsx}.

Important note about matching:

  • E2E tests will be found using the e2e.specPattern value.
  • Component tests will be found using the component.specPattern value but any tests found matching the e2e.specPattern value will be automatically excluded.
caution

Attempting to set the testFiles config option will result in an error when Cypress loads.

Also, attempting to set the specPattern config option at the top level of the configuration will result in an error when Cypress loads.

Updated Test File Locations​

Previously, you could specify the locations of test files and folders using the configuration options: componentFolder, or integrationFolder, and testFiles. These options have been replaced with specPattern, which is not valid at the top-level, but within the component or e2e configuration objects. For example:

Before
{
"componentFolder": "src",
"integrationFolder": "cypress/integration",
"testFiles": "**/*.cy.js"
}
After
{
component: {
specPattern: 'src/**/*.cy.js'
},
e2e: {
specPattern: 'cypress/integration/**/*.cy.js'
}
}
caution

Attempting to set componentFolder, integrationFolder, or testFiles in the config will result in an error when Cypress loads.

danger

For Cypress Cloud users, changing your specPattern and files names or extensions of your spec files will result in a loss of data in Cypress Cloud. Because of this, if we detect your project is using Cypress Cloud during automatic migration, we won't suggest changing your spec files. We also don't recommend doing it manually if you are a Cypress Cloud user.

Generated Files​

Generated screenshots and videos will still be created inside their respective folders (screenshotsFolder, videosFolder). However, the paths of generated files inside those folders will be stripped of any common ancestor paths shared between all spec files found by the specPattern option (or via the --spec command line option or spec module API option, if specified).

Here are a few examples, assuming the value of videosFolder is cypress/videos, screenshotsFolder is cypress/screenshots and cy.screenshot('my-screenshot') is called once per spec file:

Example 1

  • Spec file found
    • cypress/e2e/path/to/file/one.cy.js
  • Common ancestor paths (calculated at runtime)
    • cypress/e2e/path/to/file
  • Generated screenshot file
    • cypress/screenshots/one.cy.js/my-screenshot.png
  • Generated video file
    • cypress/videos/one.cy.js.mp4

Example 2

  • Spec files found
    • cypress/e2e/path/to/file/one.cy.js
    • cypress/e2e/path/to/two.cy.js
  • Common ancestor paths (calculated at runtime)
    • cypress/e2e/path/to
  • Generated screenshot files
    • cypress/screenshots/file/one.cy.js/my-screenshot.png
    • cypress/screenshots/two.cy.js/my-screenshot.png
  • Generated video files
    • cypress/videos/file/one.cy.js.mp4
    • cypress/videos/two.cy.js.mp4

Command / Cypress API Changes​

cy.mount()​

If you set up your app using the automatic configuration wizard, a basic cy.mount() command will be imported for you in your support file from one our supported frameworks.

Cypress.Commands.add()​

Cypress.Commands.add() has been updated to allow the built-in "placeholder" custom mount and hover commands to be overwritten without needing to use Cypress.Commands.overwrite().

Component Testing Changes​

Component Testing has moved from experimental to beta status in 10.0.0.

Component Testing can now be ran from the main app, and launching into component testing via the command cypress open-ct is now deprecated. To launch directly into component testing, use the cypress open --component command instead.

All the Component Testing dev servers are now included in the main cypress npm package. Configuring them is done via specifying a framework and bundler in the devServer config option, and the packages are no longer directly importable. See Framework Configuration for more info.

The mount libraries for React and Vue have also been included in the main cypress package and can be imported from cypress/react and cypress/vue respectively.

Any previous dev servers or mounting libraries from the @cypress namespace should be uninstalled in Cypress 10.

Clashing Types with Jest​

You may want to consider configuring your app with a separate tsconfig.json to solve clashing types with jest. You will need to exclude cypress.config.ts, cypress, node_modules in your root tsconfig.json file.

{
"exclude": ["cypress.config.ts", "cypress", "node_modules"]
}

Code Coverage Plugin​

The Cypress Code Coverage plugin will need to be updated to version >= 3.10 to work with Cypress 10. Using a previous version will result in an error when tests are ran with code coverage enabled.

Migrating from cypress-file-upload to .selectFile()​

Selecting files with input elements or dropping them over the page is available in Cypress 9.3. Read the .selectFile() API docs for more information on how this works and how to use it. This guide details how to change your test code to migrate from the cypress-file-upload plugin to .selectFile().

Quick guide​

The argument signature is different for Cypress' builtin .selectFile() command than the .attachFile command the cypress-file-upload plugin provided. You can follow the steps below for each argument in order to migrate:

When the first argument is a file path:

  • Prefix the path with cypress/fixtures/.

When the first argument is an object:

  • filePath: Rename the property to contents. Prefix the value with cypress/fixtures/.
  • fileContent: Rename the property to contents. Use Cypress.Buffer.from() or other Buffer methods, rather than Cypress.Blob.
  • encoding: Remove this property. It is no longer needed due to improved binary file handling in Cypress 9.0.
  • mimeType: No change necessary. In most cases you do not need to give a mimeType explicitly. Cypress will attempt to infer the MIME type based on the extension of the fileName if none is provided.

In the second argument:

  • subjectType: Rename this property to action. Change the value from drag-n-drop to drag-drop or from input to select.
  • allowEmpty: Remove this property. .selectFile() does not check the length of a file read from disk, only its existence.
  • force: Works the same with .selectFile() as it did in cypress-file-upload. No change necessary.

Examples​

Below are several examples of migrating various commands from cypress-file-upload to the builtin .selectFile() command.

Read and attach a fixture​

Before Attaching a fixture from disk with cypress-file-upload

cy.get('[data-cy="file-input"]').attachFile('myfixture.json')

After Selecting a fixture from disk with .selectFile(). Cypress follows paths from your project root (same as cy.readFile()).

cy.get('[data-cy="file-input"]').selectFile('cypress/fixtures/myfixture.json')

// Or

cy.fixture('myfixture.json', { encoding: null }).as('myfixture')
cy.get('[data-cy="file-input"]').selectFile('@myfixture')

Using drag-n-drop​

Before Dragging and dropping a file with cypress-file-upload

cy.get('[data-cy="dropzone"]').attachFile('myfixture.json', {
subjectType: 'drag-n-drop',
})

After Selecting a fixture from disk with .selectFile(). Cypress follows paths from the root of your test folder (same as cy.readFile()).

cy.get('[data-cy="dropzone"]').selectFile('fixtures/myfixture.json', {
action: 'drag-drop',
})

Overriding the file name​

Before Dragging and dropping a file with cypress-file-upload

cy.get('[data-cy="dropzone"]').attachFile({
filePath: 'myfixture.json',
fileName: 'customFileName.json',
})

After Selecting a fixture from disk with .selectFile(). Cypress follows paths from the root of your test folder (same as cy.readFile()).

cy.get('[data-cy="dropzone"]').selectFile({
contents: 'fixtures/myfixture.json',
fileName: 'customFileName.json',
})

Working with file contents​

Before Working with file contents before using using cypress-file-upload

const special = 'file.spss'

cy.fixture(special, 'binary')
.then(Cypress.Blob.binaryStringToBlob)
.then((fileContent) => {
// ...process file contents
cy.get('[data-cy="file-input"]').attachFile({
fileContent,
filePath: special,
encoding: 'utf-8',
lastModified: new Date().getTime(),
})
})

After Working with file contents before using with .selectFile(). The null encoding introduced in Cypress 9.0 makes working with binary data simpler, and is the preferred encoding for use with .selectFile().

const special = 'file.spss'

cy.fixture(special, { encoding: null }).then((contents) => {
// ...process file contents
cy.get('[data-cy="file-input"]').selectFile({
contents,
fileName: special,
lastModified: new Date().getTime(),
})
})

// Or

cy.fixture(special, { encoding: null })
.then((contents) => {
// ...process file contents
})
.as('special')

cy.get('[data-cy="file-input"]').selectFile('@special')

Specifying a custom mimeType​

Before Specifying the MIME type with cypress-file-upload

cy.get('[data-cy="dropzone"]').attachFile({
filePath: 'myfixture.json',
fileName: 'customFileName.json',
})

After Specifying a MIME type with .selectFile().

cy.get('[data-cy="dropzone"]').selectFile({
contents: 'fixtures/myfixture.json',
mimeType: 'text/plain',
})

Migrating to Cypress 8.0​

This guide details the changes and how to change your code to migrate to Cypress 8.0. See the full changelog for 8.0.

cypress run runs all browsers --headless​

When running cypress run previous to 8.0, some browsers would launch headed while others were launched headless by default. In 8.0, we've normalized all browsers to launch as headless by default.

This could cause a couple of changes to your existing runs:

  • You may see the screenshot or video resolution of runs during cypress run change to the default of 1280x720. This is because headless browsers use the set screen size as opposed to the browser's size when opening headed.
  • Chrome extensions will not load during a --headless run. If your run depends on a Chrome extension being loaded during cypress run, you should explicitly pass the --headed flag.

You can now remove the use of the --headless flag during cypress run as this is the default for all browsers.

You should also update any use of the isHeaded or isHeadless property on Cypress.browser or the browser launch API accordingly.

Before run headless browser

cypress run --browser=chrome --headless
cypress run --browser=firefox --headless

After All browsers headless by default, so you can remove the --headless flag during cypress run.

cypress run --browser=chrome
cypress run --browser=firefox

Default screen size during --headless​

The default screen size when running a headless browser has been reverted back to 1280x720 pixels. If you have any code in the browser launch API to set the screen size to 1280x720, this can be removed.

Before set screen size to 1280x720

// cypress/plugins/index.js
module.exports = (on, config) => {
on('before:browser:launch', (browser, launchOptions) => {
if (browser.name === 'chrome' && browser.isHeadless) {
launchOptions.args.push('--window-size=1280,720')
}

if (browser.name === 'electron' && browser.isHeadless) {
launchOptions.preferences.width = 1280
launchOptions.preferences.height = 720
}

if (browser.name === 'firefox' && browser.isHeadless) {
launchOptions.args.push('--width=1280')
launchOptions.args.push('--height=720')
}

return launchOptions
})
}

After no longer need overrides

// cypress/plugins/index.js
module.exports = (on, config) => {
// the default screen size is 1280x720 in all headless browsers
}

Migrating to Cypress 7.0​

This guide details the changes and how to change your code to migrate to Cypress 7.0. See the full changelog for 7.0.

cy.intercept() changes​

Cypress 7.0 comes with some breaking changes to cy.intercept():

Handler ordering is reversed​

Previous to Cypress 7.0, cy.intercept() handlers were run in the order that they are defined, stopping after the first handler to call req.reply(), or once all handlers are complete.

With Cypress 7.0, cy.intercept() handlers are now run in reverse order of definition, stopping after the first handler to call req.reply(), or once all handlers are complete.

This change was done so that users can override previously declared cy.intercept() handlers by calling cy.intercept() again. See #9302 for more details.

Before
cy.intercept(url, (req) => {
/* This will be called first! */
})
cy.intercept(url, (req) => {
/* This will be called second! */
})
After
cy.intercept(url, (req) => {
/* This will be called second! */
})
cy.intercept(url, (req) => {
/* This will be called first! */
})

Read more about the cy.intercept() interception lifecycle.

URL matching is stricter​

Before Cypress 7.0, cy.intercept() would match URLs against strings by using minimatch, substring match, or by equality.

With Cypress 7.0, this behavior is being tightened - URLs are matched against strings only by minimatch or by equality. The substring match has been removed.

This more closely matches the URL matching behavior shown by cy.route(). However, some intercepts will not match, even though they did before.

For example, requests with querystrings may no longer match:

// will this intercept match a request for `/items?page=1`?
cy.intercept('/items')
// βœ… before 7.0.0, this will match, because it is a substring
// ❌ after 7.0.0, this will not match, because of the querystring
// solution: update the intercept to match the querystring with a wildcard:
cy.intercept('/items?*')

Also, requests for paths in nested directories may be affected:

// will this intercept match a request for `/some/items`?
cy.intercept('/items')
// βœ… before 7.0.0, this will match, because it is a substring
// ❌ after 7.0.0, this will not match, because of the leading directory
// solution: update the intercept to include the directory:
cy.intercept('/some/items')

Additionally, the matchUrlAgainstPath RouteMatcher option that was added in Cypress 6.2.0 has been removed in Cypress 7.0. It can be safely removed from tests.

Deprecated cy.route2() command removed​

cy.route2() was the original name for cy.intercept() during the experimental phase of the feature. It was deprecated in Cypress 6.0. In Cypress 7.0, it has been removed entirely. Please update existing usages of cy.route2() to call cy.intercept() instead.

Before
cy.route2('/widgets/*', { fixture: 'widget.json' }).as('widget')
After
cy.intercept('/widgets/*', { fixture: 'widget.json' }).as('widget')

res.delay() and res.throttle() have been renamed​

The res.delay() and res.throttle() functions that exist on responses yielded to response handlers have been renamed.

The new names are res.setDelay() and res.setThrottle(), respectively.

Before
cy.intercept('/slow', (req) => {
req.continue((res) => {
// apply a delay of 1 second and a throttle of 56kbps
res.delay(1000).throttle(56)
})
})
After
cy.intercept('/slow', (req) => {
req.continue((res) => {
// apply a delay of 1 second and a throttle of 56kbps
res.setDelay(1000).setThrottle(56)
})
})

Read more about available functions on res.

Falsy values are no longer dropped in StaticResponse bodies​

Previously, falsy values supplied as the body of a StaticResponse would get dropped (the same as if no body was supplied). Now, the bodies are properly encoded in the response.

Before
cy.intercept('/does-it-exist', { body: false })
// Requests to `/does-it-exist` receive an empty response body
After
cy.intercept('/does-it-exist', { body: false })
// Requests to `/does-it-exist` receive a response body of `false`

Errors thrown by request and response handlers are no longer wrapped​

Previously, errors thrown inside of req and res handlers would be wrapped by a CypressError. In 7.0.0, errors thrown inside of these handlers are not wrapped before failing the test.

This should only affect users who are explicitly asserting on global errors. See #15189 for more details.

Component Testing​

In 7.0, component testing is no longer experimental. Cypress now ships with a dedicated component test runner with a new UI and dedicated commands to launch it.

Changes are required for all existing projects. The required changes are limited to configuration and there are no breaking changes to the mount API. The migration guide contains the following steps:

  1. Update your Cypress configuration to remove experimentalComponentTesting
  2. Install updated dependencies
  3. Update the plugins file
  4. Use CLI commands to launch
  5. Update the support file (optionally)

1. Remove experimentalComponentTesting config​

The experimentalComponentTesting configuration is no longer needed to run component tests. Remove this flag in order to run Cypress tests without erroring.

Before experimentalComponentTesting flag is required for component testing

{
"experimentalComponentTesting": true,
"componentFolder": "src",
"testFiles": "**/*spec.{js,jsx,ts,tsx}"
}

After experimentalComponentTesting flag must be removed

{
"componentFolder": "src",
"testFiles": "**/*spec.{js,jsx,ts,tsx}"
}

2. Install component testing dependencies​

The Component Test Runner requires the following dependencies:

Install React dependencies

  1. Upgrade to @cypress/react 5.X.
  2. Install @cypress/webpack-dev-server.
  3. (Optional) Install cypress-react-selector if any tests use cy.react().
  4. (Optional) Install code coverage, see installation steps).
npm install cypress @cypress/react @cypress/webpack-dev-server --save-dev

Install Vue 3 dependencies

  1. Upgrade to @cypress/vue@next (3.X and above).
  2. Install @cypress/webpack-dev-server.
npm install cypress @cypress/vue@next @cypress/webpack-dev-server --save-dev

Install Vue 2 dependencies

  1. Upgrade to @cypress/vue@2 (2.X only).
  2. Install @cypress/webpack-dev-server.
npm install cypress @cypress/vue @cypress/webpack-dev-server --save-dev

3. Update plugins file to use dev-server:start​

Re-using a project's local development server instead of file preprocessors

In 7.0 Cypress component tests require that code is bundled with your local development server, via a new dev-server:start event. This event replaces the previous file:preprocessor event.

Before Plugins file registers the file:preprocessor event

const webpackPreprocessor = require('@cypress/webpack-preprocessor')
const webpackConfig = require('../webpack.config.js')

module.exports = (on, config) => {
on('file:preprocessor', webpackPreprocessor(options))
}

After Plugins file registers the dev-server:start event

// The @cypress/webpack-dev-server package replaces @cypress/webpack-preprocessor
const { startDevServer } = require('@cypress/webpack-dev-server')
const webpackConfig = require('../webpack.config.js')

module.exports = (on, config) => {
// You must use the dev-server:start event instead of the file:preprocessor event

on('dev-server:start', (options) => {
return startDevServer({ options, webpackConfig })
})
}

Configure plugins.js for React projects

Projects using React may not need to update their plugins file. If your project is using a webpack scaffold or boilerplate, it is recommended to use a preset plugin imported from @cypress/react/plugins.

Preset Plugins for React

If you are using a preset plugin within @cypress/react, you should not need to update your plugins file. To check if you are using a preset, check to see if your plugins file contains an import to a file inside of @cypress/react/plugins.

After An example plugins file to configure component testing in a React Scripts project

// The @cypress/react project exposes preset plugin configurations
// These presets automatically register the events to bundle the project properly
const injectReactScriptsDevServer = require('@cypress/react/plugins/react-scripts')

module.exports = (on, config) => {
// Internally, this method registers `dev-server:start` with the proper webpack configuration
// Previously, it registered the `file:preprocessor` event.
injectReactScriptsDevServer(on, config)

return config
}

Configure plugins.js for Vue

Projects using Vue will likely be using either @vue/cli or manually defining webpack configuration. These steps are identical to the manual setup steps, with the exception of how you resolve the webpack configuration. To access the resolved webpack configuration that contains any vue.config.js setup or the default @vue/cli webpack setup, you must import the configuration and pass it into @cypress/webpack-dev-server.

After An example plugins file to configure component testing in a Vue CLI project

const { startDevServer } = require('@cypress/webpack-dev-server')

// The resolved configuration, which contains any `vue.config.js` setup
const webpackConfig = require('@vue/cli-service/webpack.config.js')

module.exports = (on, config) => {
on('dev-server:start', (options) => {
return startDevServer({ options, webpackConfig })
})
}

Configuring a project with vanilla webpack

For projects with manually defined or ejected webpack configurations, the webpack configuration must be passed in.

After An example plugins file to configure component testing in a project with vanilla webpack

const { startDevServer } = require('@cypress/webpack-dev-server')
const webpackConfig = require('../webpack.config.js')

module.exports = (on, config) => {
on('dev-server:start', (options) => {
return startDevServer({ options, webpackConfig })
})
}

4. Use CLI commands to launch​

To run your component tests you must use the dedicated component testing subcommands.

  • cypress open-ct
  • cypress run-ct
info

Component tests will no longer be picked up when launching Cypress from cypress open or cypress run. Please use cypress open-ct or cypress run-ct.

Before Commands launches both end-to-end and component tests.

npx cypress run

After Command launches Cypress Component Test Runner and executes component tests. End-to-end tests are run separately.

# open component testing runner
cypress open-ct

# run all component tests
cypress run-ct

# e2e tests
cypress open
cypress run

5. Update the support file (optionally)​

Previously, a support file was required to set up the component testing target node. This is no longer necessary.

Specifically for React users, if the support file contains the following line, please remove it. The import will fail in the future. We have left it in to avoid a breaking change, but the file does nothing.

Before The support file was required to import a script from @cypress/react

// support.js

// This import should be removed, it will error in a future update
import '@cypress/react/hooks'

Expanded stylesheet support​

Stylesheets are now bundled and imported within spec and support files. Previously, many of mount's mounting options such as stylesheets, cssFiles, and styles were required to import stylesheets into your component tests. This often involved pre-compiling the stylesheets before launching the component tests, which affected performance. Migrating to imports for these styles is optional, but recommended.

Now, stylesheets should be loaded into the document the same way they are in your application. It is recommended you update your code like so:

Before Stylesheets were loaded using the filesystem

const { mount } = require('@cypress/react')
const Button = require('./Button')

it('renders a Button', () => {
// Mounting a button and loading the Tailwind CSS library
mount(<Button />, {
stylesheets: [
// Paths are relative to the project root directory and must be pre-compiled
// Because they are static, they do not watch for file updates
'/dist/index.css',
'/node_modules/tailwindcss/dist/tailwind.min.css',
],
})
})

After Stylesheets are supported via an import and mountingOptions.stylesheets is not recommended

// In the majority of modern style-loaders,
// these styles will be injected into document.head when they're imported below
require('./index.scss')
require('tailwindcss/dist/tailwind.min.css')

const { mount } = require('@cypress/react')
const Button = require('./Button')

it('renders a Button', () => {
// This button will render with the Tailwind CSS styles
// as well as the application's index.scss styles
mount(<Button />)
})

Desktop GUI no longer displays component tests​

Previously, the Desktop GUI displayed both end-to-end and component tests. Now, component tests are only displayed when launching via the component testing-specific subcommands. cypress open-ct (or run-ct in CI)

Executing all or some component tests​

In 6.X, the Desktop GUI had support for finding and executing a subset of component tests. In 7.0, this is possible with the --headed command and a spec glob, like so:

cypress run-ct --headed --spec **/some-folder/*spec.*

Coverage​

Previously, the @cypress/react 4.X package embedded code coverage in your tests automatically.

If you still wish to record code coverage in your tests, you must manually install it. Please see our code coverage guide for the latest steps.

cypress-react-selector​

If you use cy.react() in your tests, you must manually install cypress-react-selector with npm install cypress-react-selector --save-dev. You do not need to update your support file.

HTML Side effects​

As of 7.0, we only clean up components mounted by Cypress via @cypress/react or @cypress/vue.

We no longer automatically reset the document.body between tests. Any HTML side effects of your component tests will carry over.

Before All HTML content was cleared between spec files

const { mount } = require('@cypress/react')

describe('Component teardown behavior', () => {
it('modifies the document and mounts a component', () => {
// HTML unrelated to the component is mounted
Cypress.$('body').append('<div data-cy="some-html"/>')

// A component is mounted
mount(<Button data-cy="my-button"></Button>)

cy.get('[data-cy="some-html"]').should('exist')
cy.get('[data-cy="my-button"]').should('exist')
})

it('cleans up any HTML', () => {
// The component is automatically unmounted by Cypress
cy.get('[data-cy="my-button"]').should('not.exist')

// The HTML left over from the previous test has been cleaned up
// This was done automatically by Cypress
cy.get('[data-cy="some-html"]').should('not.exist')
})
})

After Only the components are cleaned up between spec files

const { mount } = require('@cypress/react')

describe('Component teardown behavior', () => {
it('modifies the document and mounts a component', () => {
// HTML unrelated to the component is mounted
Cypress.$('body').append('<div data-cy="some-html"/>')

// A component is mounted
mount(<Button data-cy="my-button"></Button>)

cy.get('[data-cy="some-html"]').should('exist')
cy.get('[data-cy="my-button"]').should('exist')
})

it('only cleans up *components* between tests', () => {
// The component is automatically unmounted by Cypress
cy.get('[data-cy="my-button"]').should('not.exist')

// The HTML left over from the previous test should be manually cleared
cy.get('[data-cy="some-html"]').should('not.exist')
})
})

Legacy cypress-react-unit-test and cypress-vue-unit-test packages​

For users upgrading from cypress-react-unit-tests or cypress-vue-unit-tests, please update all references to use @cypress/react or @cypress/vue. These packages have been deprecated and moved to the Cypress scope on npm.

Uncaught exception and unhandled rejections​

In 7.0, Cypress now fails tests in more situations where there is an uncaught exception and also if there is an unhandled promise rejection in the application under test.

You can ignore these situations and not fail the Cypress test with the code below.

Turn off all uncaught exception handling​

Cypress.on('uncaught:exception', (err, runnable) => {
// returning false here prevents Cypress from
// failing the test
return false
})

Turn off uncaught exception handling unhandled promise rejections​

Cypress.on('uncaught:exception', (err, runnable, promise) => {
// when the exception originated from an unhandled promise
// rejection, the promise is provided as a third argument
// you can turn off failing the test in this case
if (promise) {
// returning false here prevents Cypress from
// failing the test
return false
}
})

Node.js 12+ support​

Cypress comes bundled with its own Node.js version. However, installing the cypress npm package uses the Node.js version installed on your system.

Node.js 10 reached its end of life on Dec 31, 2019 and Node.js 13 reached its end of life on June 1, 2019. See Node's release schedule. These Node.js versions will no longer be supported when installing Cypress. The minimum Node.js version supported to install Cypress is Node.js 12 or Node.js 14+.

Migrating cy.route() to cy.intercept()​

This guide details how to change your test code to migrate from cy.route() to cy.intercept(). cy.server() and cy.route() are deprecated in Cypress 6.0.0. In a future release, support for cy.server() and cy.route() will be removed.

Please also refer to the full documentation for cy.intercept().

Match simple route​

In many use cases, you can replace cy.route() with cy.intercept() and remove the call to cy.server() (which is no longer necessary).

Before
// Set up XHR listeners using cy.route()
cy.server()
cy.route('/users').as('getUsers')
cy.route('POST', '/project').as('createProject')
cy.route('PATCH', '/projects/*').as('updateProject')
After
// Intercept HTTP requests
cy.intercept('/users').as('getUsers')
cy.intercept('POST', '/project').as('createProject')
cy.intercept('PATCH', '/projects/*').as('updateProject')

Match against url and path​

The url argument to cy.intercept() matches against the full url, as opposed to the url or path in cy.route(). If you're using the url argument in cy.intercept(), you may need to update your code depending on the route you're trying to match.

Before
// Match XHRs with a path or url of /users
cy.server()
cy.route({
method: 'POST',
url: '/users',
}).as('getUsers')
After
// Match HTTP requests with a path of /users
cy.intercept({
method: 'POST',
path: '/users',
}).as('getUsers')

// OR
// Match HTTP requests with an exact url of https://example.cypress.io/users
cy.intercept({
method: 'POST',
url: 'https://example.cypress.io/users',
}).as('getUsers')

cy.wait() object​

The object returned by cy.wait() is different from intercepted HTTP requests using cy.intercept() than the object returned from an awaited cy.route() XHR.

Before
// Wait for XHR from cy.route()
cy.route('POST', '/users').as('createUser')
// ...
cy.wait('@createUser').then(({ requestBody, responseBody, status }) => {
expect(status).to.eq(200)
expect(requestBody.firstName).to.eq('Jane')
expect(responseBody.firstName).to.eq('Jane')
})
After
// Wait for intercepted HTTP request
cy.intercept('POST', '/users').as('createUser')
// ...
cy.wait('@createUser').then(({ request, response }) => {
expect(response.statusCode).to.eq(200)
expect(request.body.name).to.eq('Jane')
expect(response.body.name).to.eq('Jane')
})

Fixtures​

You can stub requests and response with fixture data by defining a fixture property in the routeHandler argument for cy.intercept().

Before
// Stub response with fixture data using cy.route()
cy.route('GET', '/projects', 'fx:projects')
After
// Stub response with fixture data using cy.intercept()
cy.intercept('GET', '/projects', {
fixture: 'projects',
})

Override intercepts​

As of 7.0, newer intercepts are called before older intercepts, allowing users to override intercepts. See "Handler ordering is reversed" for more details.

Before 7.0, intercepts could not be overridden. See #9302 for more details.

Migrating to Cypress 6.0​

This guide details the changes and how to change your code to migrate to Cypress 6.0. See the full changelog for 6.0.

Non-existent element assertions​

info

Key takeway: Use .should('not.exist') to assert that an element does not exist in the DOM (not .should('not.be.visible'), etc).

In previous versions of Cypress, there was a possibility for tests to falsely pass when asserting a negative state on non-existent elements.

For example, in the tests below we want to test that the search dropdown is no longer visible when the search input is blurred because we hide the element in CSS styles. Except in this test, we've mistakenly misspelled one of our selectors.

cy.get('input[type=search]').type('Cypress')
cy.get('#dropdown').should('be.visible')
cy.get('input[type=search]').blur()

// below we misspelled "dropdown" in the selector 😞
// the assertions falsely pass in Cypress < 6.0
// and will correctly fail in Cypress 6.0 +
cy.get('#dropdon').should('not.be.visible')
cy.get('#dropdon').should('not.have.class', 'open')
cy.get('#dropdon').should('not.contain', 'Cypress')
non-existent element before 6.0

In 6.0, these assertions will now correctly fail, telling us that the #dropdon element doesn't exist in the DOM.

non-existent element in 6.0

Assertions on non-existent elements​

This fix may cause some breaking changes in your tests if you are relying on assertions such as not.be.visible or not.contains to test that the DOM element did not exist in the DOM. This means you'll need to update your test code to be more specific about your assertions on non-existent elements.

Before Assert that non existent element was not visible

it('test', () => {
// the modal element is removed from the DOM on click
cy.get('[data-cy="modal"]').find('.close').click()
// assertions below pass in Cypress < 6.0, but properly fail in 6.0+
cy.get('[data-cy="modal"]').should('not.be.visible')
cy.get('[data-cy="modal"]').should('not.contain', 'Upgrade')
})

After Assert that non existent element does not exist

it('test', () => {
// the modal element is removed from the DOM on click
cy.get('data-cy="modal"').find('.close').click()
// we should instead assert that the element doesn't exist
cy.get('data-cy="modal"').should('not.exist')
})

Opacity visibility​

DOM elements with opacity: 0 style are no longer considered to be visible. This includes elements with an ancestor that has opacity: 0 since a child element can never have a computed opacity greater than that of an ancestor.

Elements where the CSS property (or ancestors) is opacity: 0 are still considered actionable however and any action commands used to interact with the element will perform the action. This matches browser's implementation on how they regard elements with opacity: 0.

Assert visibility of opacity: 0 element​

Before Failed assertion that opacity: 0 element is not visible.

it('test', () => {
// '.hidden' has 'opacity: 0' style.
// In < 5.0 this assertion would fail
cy.get('.hidden').should('not.be.visible')
})

After Passed assertion that opacity: 0 element is not visible.

it('test', () => {
// '.hidden' has 'opacity: 0' style.
// In 6.0 this assertion will pass
cy.get('.hidden').should('not.be.visible')
})

Perform actions on opacity: 0 element​

In all versions of Cypress, you can interact with elements that have opacity: 0 style.

it('test', () => {
// '.hidden' has 'opacity: 0' style.
cy.get('.hidden').click() // βœ… clicks on element
cy.get('.hidden').type('hi') // βœ… types into element
cy.get('.hidden').check() // βœ… checks element
cy.get('.hidden').select('yes') // βœ… selects element
})

cy.wait(alias) type​

cy.route() is deprecated in 6.0.0. We encourage the use of cy.intercept() instead. Due to this deprecation, the type yielded by cy.wait(alias) has changed.

Before Before 6.0.0, cy.wait(alias) would yield an object of type WaitXHR.

After In 6.0.0 and onwards, cy.wait(alias) will yield an object of type Interception. This matches the new interception object type used for cy.intercept().

Restore old behavior​

If you need to restore the type behavior prior to 6.0.0 for cy.wait(alias), you can declare a global override for cy.wait() like so:

declare global {
namespace Cypress {
interface Chainable<Subject = any> {
wait(alias: string): Chainable<Cypress.WaitXHR>
}
}
}

β€”disable-dev-shm-usage​

We now pass β€”disable-dev-shm-usage to the Chrome browser flags by default. If you're passing this flag in your plugins file, you can now remove this code.

Before Passing flag in plugins file.

// cypress/plugins/index.js
module.exports = (on, config) => {
on('before:browser:launch', (browser = {}, launchOptions) => {
if (browser.family === 'chromium' && browser.name !== 'electron') {
launchOptions.args.push('--disable-dev-shm-usage')
}

return launchOptions
})
}

After Remove flag from plugins file.

// cypress/plugins/index.js
module.exports = (on, config) => {}

Restore old behavior​

If you need to remove the flag in 6.0.0+, you can follow the workaround documented here: #9242.

Migrating to Cypress 5.0​

This guide details the changes and how to change your code to migrate to Cypress 5.0. See the full changelog for 5.0.

Tests retries​

Test retries are available in Cypress 5.0. This means that tests can be re-run a number of times before potentially being marked as a failed test. Read the Test Retries doc for more information on how this works and how to turn on test retries.

When test retries are turned on, there will now be a screenshot taken for every failed attempt, so there could potentially be more than 1 screenshot per test failure. Read the Test Retries doc for more information on how this works.

The cypress-plugin-retries plugin has been deprecated in favor of test retries built into Cypress. There's guidance below on how to migrate from the cypress-plugin-retries plugin to Cypress's built-in test retries.

Configure test retries via the CLI​

Before Setting retries with cypress-plugin-retries via env vars

CYPRESS_RETRIES=2 cypress run

After Setting test retries in Cypress 5.0 via env vars

CYPRESS_RETRIES=2 cypress run

Configure test retries in the configuration file​

Before Setting retries with cypress-plugin-retries via configuration

{
"env": {
"RETRIES": 2
}
}

After Setting test retries in Cypress 5.0 via configuration

{
"retries": 1
}
  • runMode allows you to define the number of test retries when running cypress run
  • openMode allows you to define the number of test retries when running cypress open
{
"retries": {
"runMode": 1,
"openMode": 3
}
}

Configure test retries per test​

Before Setting retries with cypress-plugin-retries via the test

it('test', () => {
Cypress.currentTest.retries(2)
})

After Setting test retries in Cypress 5.0 via test options

it(
'allows user to login',
{
retries: 2,
},
() => {
// ...
}
)
  • runMode allows you to define the number of test retries when running cypress run
  • openMode allows you to define the number of test retries when running cypress open
it(
'allows user to login',
{
retries: {
runMode: 2,
openMode: 3,
},
},
() => {
// ...
}
)

Module API results​

To more accurately reflect result data for runs with test retries, the structure of each run's runs array resolved from the Promise returned from cypress.run() of the Module API has changed.

Mainly there is a new attempts Array on each test which will reflect the result of each test retry.

Before results.runs Module API results

{
// ...
"runs": [{
// ...
"hooks": [{
"hookId": "h1",
"hookName": "before each",
"title": [ "before each hook" ],
"body": "function () {\n expect(true).to.be["true"];\n}"
}],
// ...
"screenshots": [{
"screenshotId": "8ddmk",
"name": null,
"testId": "r2",
"takenAt": "2020-08-05T08:52:20.432Z",
"path": "User/janelane/my-app/cypress/screenshots/spec.js/test (failed).png",
"height": 720,
"width": 1280
}],
"stats": {
// ...
"wallClockStartedAt": "2020-08-05T08:38:37.589Z",
"wallClockEndedAt": "2018-07-11T17:53:35.675Z",
"wallClockDuration": 1171
},
"tests": [{
"testId": "r2",
"title": [ "test" ],
"state": "failed",
"body": "function () {\n expect(true).to.be["false"];\n}",
"stack": "AssertionError: expected true to be false\n' +
' at Context.eval (...cypress/integration/spec.js:5:21",
"error": "expected true to be false",
"timings": {
"lifecycle": 16,
"test": {...}
},
"failedFromHookId": null,
"wallClockStartedAt": "2020-08-05T08:38:37.589Z",
"wallClockDuration": 1171,
"videoTimestamp": 4486
}],
}],
// ...
}

After results.runs Module API results

{
// ...
"runs": [{
// ...
"hooks": [{
"hookName": "before each",
"title": [ "before each hook" ],
"body": "function () {\n expect(true).to.be["true"];\n}"
}],
// ...
"stats": {
// ...
"startedAt": "2020-08-05T08:38:37.589Z",
"endedAt": "2018-07-11T17:53:35.675Z",
"duration": 1171
},
"tests": [{
"title": [ "test" ],
"state": "failed",
"body": "function () {\n expect(true).to.be["false"];\n}",
"displayError": "AssertionError: expected true to be false\n' +
' at Context.eval (...cypress/integration/spec.js:5:21",
"attempts": [{
"state": "failed",
"error": {
"message": "expected true to be false",
"name": "AssertionError",
"stack": "AssertionError: expected true to be false\n' +
' at Context.eval (...cypress/integration/spec.js:5:21"
},
"screenshots": [{
"name": null,
"takenAt": "2020-08-05T08:52:20.432Z",
"path": "User/janelane/my-app/cypress/screenshots/spec.js/test (failed).png",
"height": 720,
"width": 1280
}],
"startedAt": "2020-08-05T08:38:37.589Z",
"duration": 1171,
"videoTimestamp": 4486
}]
}],
}],
// ...
}

Cookies whitelist option renamed​

The Cypress.Cookies.defaults() whitelist option has been renamed to preserve to more closely reflect its behavior.

Before whitelist option

Cypress.Cookies.defaults({
whitelist: 'session_id',
})

After preserve option

Cypress.Cookies.defaults({
preserve: 'session_id',
})

blacklistHosts configuration renamed​

The blacklistHosts configuration has been renamed to blockHosts to more closely reflect its behavior.

This should be updated in all places where Cypress configuration can be set including via the Cypress configuration file, command line arguments, the pluginsFile, Cypress.config() or environment variables.

Before blacklistHosts configuration

{
"blacklistHosts": "www.google-analytics.com"
}

After blockHosts configuration

{
"blockHosts": "www.google-analytics.com"
}

Return type of Cypress.Blob changed​

We updated the Blob library used behind Cypress.Blob from 1.3.3 to 2.0.2.

The return type of the Cypress.Blob methods arrayBufferToBlob, base64StringToBlob, binaryStringToBlob, and dataURLToBlob have changed from Promise<Blob> to Blob.

Before Cypress.Blob methods returned a Promise

Cypress.Blob.base64StringToBlob(this.logo, 'image/png').then((blob) => {
// work with the returned blob
})

After Cypress.Blob methods return a Blob

const blob = Cypress.Blob.base64StringToBlob(this.logo, 'image/png')

// work with the returned blob

cy.server() whitelist option renamed​

The cy.server() whitelist option has been renamed to ignore to more closely reflect its behavior.

Before whitelist option

cy.server({
whitelist: (xhr) => {
return xhr.method === 'GET' && /\.(jsx?|html|css)(\?.*)?$/.test(xhr.url)
},
})

After ignore option

cy.server({
ignore: (xhr) => {
return xhr.method === 'GET' && /\.(jsx?|html|css)(\?.*)?$/.test(xhr.url)
},
})

Cookies sameSite property​

Values yielded by cy.setCookie(), cy.getCookie(), and cy.getCookies() will now contain the sameSite property if specified.

If you were using the experimentalGetCookiesSameSite configuration to get the sameSite property previously, this should be removed.

Before Cookies yielded before had no sameSite property.

cy.getCookie('token').then((cookie) => {
// cy.getCookie() yields a cookie object
// {
// domain: "localhost",
// expiry: 1593551644,
// httpOnly: false,
// name: "token",
// path: "/commands",
// secure: false,
// value: "123ABC"
// }
})

After Cookies yielded now have sameSite property if specified.

cy.getCookie('token').then((cookie) => {
// cy.getCookie() yields a cookie object
// {
// domain: "localhost",
// expiry: 1593551644,
// httpOnly: false,
// name: "token",
// path: "/commands",
// sameSite: "strict",
// secure: false,
// value: "123ABC"
// }
})

dirname / filename​

The globals __dirname and __filename no longer include a leading slash.

Before __dirname / __filename

// cypress/integration/app_spec.js
it('include leading slash < 5.0', () => {
expect(__dirname).to.equal('/cypress/integration')
expect(__filename).to.equal('/cypress/integration/app_spec.js')
})

After __dirname / __filename

// cypress/integration/app_spec.js
it('do not include leading slash >= 5.0', () => {
expect(__dirname).to.equal('cypress/integration')
expect(__filename).to.equal('cypress/integration/app_spec.js')
})

Linux dependencies​

Running Cypress on Linux now requires the libgbm dependency (on Debian-based systems, this is available as libgbm-dev). To install all required dependencies on Ubuntu/Debian, you can run the script below:

apt-get install libgtk2.0-0 libgtk-3-0 libgbm-dev libnotify-dev libnss3 libxss1 libasound2 libxtst6 xauth xvfb

TypeScript esModuleInterop​

Cypress no longer forces the esModuleInterop compiler option for TypeScript to be true for spec, support, and plugins files. We recommend setting it in your project's tsconfig.json instead if you need to.

// tsconfig.json
{
"compilerOptions": {
"esModuleInterop": true
/* ... other compiler options ... */
}
}

TypeScript 3.4+ support​

Cypress 5.0 raises minimum required TypeScript version from 2.9+ to 3.4+. You'll need to have TypeScript 3.4+ installed within your project to have TypeScript support within Cypress.

Node.js 10+ support​

Cypress comes bundled with its own Node.js version. However, installing the cypress npm package uses the Node.js version installed on your system.

Node.js 8 reached its end of life on Dec 31, 2019 and Node.js 11 reached its end of life on June 1, 2019. See Node's release schedule. These Node.js versions will no longer be supported when installing Cypress. The minimum Node.js version supported to install Cypress is Node.js 10 or Node.js 12+.

Migrating to Cypress 4.0​

This guide details the changes and how to change your code to migrate to Cypress 4.0. See the full changelog for 4.0.

Mocha upgrade​

Mocha was upgraded from 2.5.3 to 7.0.1, which includes a number of breaking changes and new features outlined in their changelog. Some changes you might notice are described below.

Breaking Change: invoke done callback and return a promise​

Starting with Mocha 3.0.0, invoking a done callback and returning a promise in a test results in an error.

This error originates from Mocha and is discussed at length here and here.

The reason is that using two different ways to signal that a test is finished is usually a mistake and there is always a way to only use one. There is a proposal to handle this situation without erroring that may be released in a future version of Mocha.

In the meantime, you can fix the error by choosing a single way to signal the end of your test's execution.

Example #1​

Before This test has a done callback and a promise

it('uses invokes done and returns promise', (done) => {
return codeUnderTest.doSomethingThatReturnsPromise().then((result) => {
// assertions here
done()
})
})

After You can remove the done callback and return the promise instead:

it('uses invokes done and returns promise', () => {
return codeUnderTest.doSomethingThatReturnsPromise().then((result) => {
// assertions here
})
})
Example #2​

Before Sometimes it might make more sense to use the done callback and not return a promise:

it('uses invokes done and returns promise', (done) => {
eventEmitter.on('change', () => {
// assertions
done()
})

return eventEmitter.doSomethingThatEmitsChange()
})

After In this case, you don't need to return the promise:

it('uses invokes done and returns promise', (done) => {
eventEmitter.on('change', () => {
// assertions
done()
})

eventEmitter.doSomethingThatEmitsChange()
})
Example #3​

Test functions using async/await automatically return a promise, so they need to be refactored to not use a done callback.

Before This will cause an overspecified error.

it('uses async/await', async (done) => {
const eventEmitter = await getEventEmitter()
eventEmitter.on('change', () => done())
eventEmitter.doSomethingThatEmitsChange()
})

After Update to the test code below.

it('uses async/await', async () => {
const eventEmitter = await getEventEmitter()
return new Promise((resolve) => {
eventEmitter.on('change', () => resolve())
eventEmitter.doSomethingThatEmitsChange()
})
})

Tests require a title​

Tests now require a title and will error when not provided one.

// Would show as pending in Cypress 3
// Will throw type error in Cypress 4:
it() // Test argument "title" should be a string. Received type "undefined"

Chai upgrade​

Chai was upgraded from 3.5.0 to 4.2.0, which includes a number of breaking changes and new features outlined in Chai's migration guide. Some changes you might notice are described below.

Breaking Change: assertions expecting numbers​

Some assertions will now throw an error if the assertion's target or arguments are not numbers, including within, above, least, below, most, increase and decrease.

// These will now throw errors:
expect(null).to.be.within(0, 1)
expect(null).to.be.above(10)
// This will not throw errors:
expect('string').to.have.a.length.of.at.least(3)

Breaking Change: empty assertions​

The .empty assertion will now throw when it is passed non-string primitives and functions.

// These will now throw TypeErrors
expect(Symbol()).to.be.empty
expect(() => {}).to.be.empty

Breaking Change: non-existent properties​

An error will throw when a non-existent property is read. If there are typos in property assertions, they will now appear as failures.

// Would pass in Cypress 3 but will fail correctly in 4
expect(true).to.be.ture

Breaking Change: include checks strict equality​

include now always use strict equality unless the deep property is set.

Before include would always use deep equality

// Would pass in Cypress 3 but will fail correctly in 4
cy.wrap([
{
first: 'Jane',
last: 'Lane',
},
]).should('include', {
first: 'Jane',
last: 'Lane',
})

After Need to specificy deep.include for deep equality

// Specifically check for deep.include to pass in Cypress 4
cy.wrap([
{
first: 'Jane',
last: 'Lane',
},
]).should('deep.include', {
first: 'Jane',
last: 'Lane',
})

Sinon.JS upgrade​

Sinon.JS was upgraded from 3.2.0 to 8.1.1, which includes a number of breaking changes and new features outlined in Sinon.JS's migration guide. Some changes you might notice are described below.

Breaking Change: stub non-existent properties​

An error will throw when trying to stub a non-existent property.

// Would pass in Cypress 3 but will fail in 4
cy.stub(obj, 'nonExistingProperty')

Breaking Change: reset() replaced by resetHistory()​

For spies and stubs, the reset() method was replaced by resetHistory().

Before Spies and stubs using reset().

const spy = cy.spy()
const stub = cy.stub()

spy.reset()
stub.reset()

After Update spies and stubs should now use resetHistory().

const spy = cy.spy()
const stub = cy.stub()

spy.resetHistory()
stub.resetHistory()

Plugin Event before:browser:launch​

Since we now support more advanced browser launch options, during before:browser:launch we no longer yield the second argument as an array of browser arguments and instead yield a launchOptions object with an args property.

You can see more examples of the new launchOptions in use in the Browser Launch API doc.

Before The second argument is no longer an array.

on('before:browser:launch', (browser, args) => {
// will print a deprecation warning telling you
// to change your code to the new signature
args.push('--another-arg')

return args
})

After Access the args property off launchOptions

on('before:browser:launch', (browser, launchOptions) => {
launchOptions.args.push('--another-arg')

return launchOptions
})

Electron options in before:browser:launch​

Previously, you could pass options to the launched Electron BrowserWindow in before:browser:launch by modifying the launchOptions object.

Now, you must pass those options as launchOptions.preferences:

Before Passing BrowserWindow options on the launchOptions object is no longer supported.

on('before:browser:launch', (browser, args) => {
args.darkTheme = true

return args
})

After Pass BrowserWindow options on the options.preferences object instead.

on('before:browser:launch', (browser, launchOptions) => {
launchOptions.preferences.darkTheme = true

return launchOptions
})

Launching Chrome Canary with --browser​

Before 4.0, cypress run --browser canary would run tests in Chrome Canary.

Now, you must pass --browser chrome:canary to select Chrome Canary.

See the docs for cypress run --browser for more information.

Before Passing canary will no longer find a browser

cypress run --browser canary

After Pass chrome:canary to launch Chrome Canary

cypress run --browser chrome:canary

Chromium-based browser family​

We updated the Cypress browser objects of all Chromium-based browsers, including Electron, to have chromium set as their family field.

module.exports = (on, config) => {
on('before:browser:launch', (browser = {}, launchOptions) => {
if (browser.family === 'electron') {
// would match Electron in 3.x
// will match no browsers in 4.0.0
return launchOptions
}

if (browser.family === 'chromium') {
// would match no browsers in 3.x
// will match any Chromium-based browser in 4.0.0
// ie Chrome, Canary, Chromium, Electron, Edge (Chromium-based)
return launchOptions
}
})
}

Example #1 (Finding Electron)​

Before This will no longer find the Electron browser.

module.exports = (on, config) => {
on('before:browser:launch', (browser = {}, args) => {
if (browser.family === 'electron') {
// run code for Electron browser in 3.x
return args
}
})
}

After Use browser.name to check for Electron

module.exports = (on, config) => {
on('before:browser:launch', (browser = {}, launchOptions) => {
if (browser.name === 'electron') {
// run code for Electron browser in 4.0.0
return launchOptions
}
})
}

Example #2 (Finding Chromium-based browsers)​

Before This will no longer find any browsers.

module.exports = (on, config) => {
on('before:browser:launch', (browser = {}, args) => {
if (browser.family === 'chrome') {
// in 4.x, `family` was changed to 'chromium' for all Chromium-based browsers
return args
}
})
}

After Use browser.name and browser.family to select non-Electron Chromium-based browsers

module.exports = (on, config) => {
on('before:browser:launch', (browser = {}, launchOptions) => {
if (browser.family === 'chromium' && browser.name !== 'electron') {
// pass launchOptions to Chromium-based browsers in 4.0
return launchOptions
}
})
}

cy.writeFile() yields null​

cy.writeFile() now yields null instead of the contents written to the file. This change was made to more closely align with the behavior of Node.js fs.writeFile.

Before This assertion will no longer pass

cy.writeFile('path/to/message.txt', 'Hello World').then((text) => {
// Would pass in Cypress 3 but will fail in 4
expect(text).to.equal('Hello World') // false
})

After Instead read the contents of the file

cy.writeFile('path/to/message.txt', 'Hello World')
cy.readFile('path/to/message.txt').then((text) => {
expect(text).to.equal('Hello World') // true
})

cy.contains() ignores invisible whitespaces​

Browsers ignore leading, trailing, duplicate whitespaces. And Cypress now does that, too.

<p>hello world</p>
cy.get('p').contains('hello world') // Fail in 3.x. Pass in 4.0.0.
cy.get('p').contains('hello\nworld') // Pass in 3.x. Fail in 4.0.0.

Node.js 8+ support​

Cypress comes bundled with its own Node.js version. However, installing the cypress npm package uses the Node.js version installed on your system.

Node.js 4 reached its end of life on April 30, 2018 and Node.js 6 reached its end of life on April 30, 2019. See Node's release schedule. These Node.js versions will no longer be supported when installing Cypress. The minimum Node.js version supported to install Cypress is Node.js 8.

CJSX is no longer supported​

Cypress no longer supports CJSX (CoffeeScript + JSX), because the library used to transpile it is no longer maintained.

If you need CJSX support, you can use a pre-2.x version of the Browserify preprocessor.

npm install @cypress/[email protected]
// cypress/plugins/index.js
const browserify = require('@cypress/browserify-preprocessor')

module.exports = (on) => {
on('file:preprocessor', browserify())
}

Contents